Hardware Installation; System Requirements For The Card; Install The Pci Adapter - NetComm NP5420 User Manual

Hardware Installation

This section gives detailed instructions for connecting your NB5420 to a PCI slot of a desktop
computer.

System Requirements for the Card

■
Operating System: Microsoft Windows 98/ME/2000/XP
■
Desktop computer with a CD-ROM drive
■
One free PCI slot
■
Pentium-Class 90MHz or higher

Install the PCI Adapter

NOTE: These instructions apply to most desktop computers. For detailed information on
inserting a PCI Adapter into your desktop computer, consult the desktop computer
User's Manual.
1. Turn off the computer‚ unplug the power cord and remove the computer's cover.
2. Pick a free PCI expansion slot and remover the protective bracket.
3. Insert the Card into the slot until it is fully seated.
4. Secure the Card bracket with the screw from step 2.
5. Replace the computer's cover.
6. Reconnect the power cord and turn on the computer.
Rev. 1 - YML678
NP5420 11G Wireless PC Card User Guide
www.netcomm.com.au
Page 9