GE JSP47 Installation Instructions Manual page 6

Installation Instructions
Standard Installation
B
STANDARD INSTALLATION
9/16" Min.
Flat
If the construction of your cabinet cannot
provide a 1/4" flat area at the back of the
countertop opening, consider changing the
countertop to accommodate this dimension.
See Alternate Construction section. If the area
is not flat, excess tension may be applied to
the glass cooktop, causing breakage and
voiding the warranty.
1/4" Min.
Flat
23-3/16"
29-15/16"– 30-1/16"
Smooth Cut
Wall
25"
Typically
9/16" Min.
Flat
Center the 30" wide opening over the
B1
adjacent cabinets and mark with a
straight edge.
Using a straight edge, mark the back line
B2
at 23-3/16" from the front edge of the
counter.
Be careful not to damage the adjacent
B3
cabinets while cutting the countertop.
Use a hand or saber saw to make
straight smooth cuts.
Remove countertop raised edge, if
B4
incorporated. (See illustration on page 5)
6
Flat
Area
R
36"
1/4"