Page 1
SPLIT TYPE WALL MOUNTED AIR-CONDITIONER Model:ACP1/ACP15/ACP25 INSTRUCTIONS Thank you for you purchasing our air conditioner. Please pay attention to the following: The installation should be carried out by licenced electrician In order to use it safely, correctly and efficiently, please read the instructions carefully and keep the instructions for reference in the future.
CONTENTS Specifications -----------------------------------------------------------1 Parts Description--------------------------------------------------------2 Outdoor Unit -------------------------------------------------------2 Usage -------------------------------------------------------------------3 Working condition -------------------------------------------------3 Remote controller usage ------------------------------------------3 Hand control operation --------------------------------------------3 Items of attention-------------------------------------------------------4 Checking before usage --------------------------------------------4 Safety rules ---------------------------------------------------------4 Optimal operation --------------------------------------------------5 Maintenance ------------------------------------------------------------6 ---------------------------6 Failure type and methods of resolution Non-air conditioner trouble ---------------------------------------7 Cleaning...
Parts Description Indoor Unit Indoor Unit Installation board Middle frame Indication light and signal receiver Front panel Horizontal airflow direction vane Vertical airflow direction vane(inner) Air filter Pipe protection ring Drain pipe Outdoor Unit Outdoor Unit Pipe and Drain pipe Cut-off valve Outlet cover Fig.1...
Wind direction adjusting 1.Horizontal wind direction adjusting Use hands to move the vane and change the horizontal wind direction. Note: Adjust the horizontal wind direction before the air-conditioner starts. Don t insert your finger into air-out window when the air-conditioner is operating. 2.Vertical wind direction adjusting Refer to Remote Controller Usage Instruction...
Optimal operation Pay attention to the following items so as to ensure optimal operation of the system, detailed operation see the relevant content. Please set the scheduled operation time with the remote controller. Set the suitable temperature for a comfortable environment. Don t make the room too cold or too hot.
Danger Don t put your hand or stick-shaped objects Don t touch the swinging wind vanes, into the air outlet of the indoor and outdoor or it may clamp your finger and damage the driving parts of the wind vanes. unit, otherwise, the rotating fan at high speed may cause injury to you.
In case the following situations, please deal with it according to the following methods, if it does not work, please contact distributor and inform the detailed failure. Causes Failure Methods of resolution Power supply failure Wait for the recovery of power supply The power switch is released Switch on the power Start-up...
Page 10
2.White steam comes out from the indoor unit During the cooling operation ,under high relative humidity indoors, white steam may come out due to the high humidity and temperature difference of air inlet and outlet. The air-conditioner convert to heating operation after the frost dissolving, the moisture (due to frost dissolving) is discharged in form of steam.
Cleaning Warning: For the purpose of safety, please turn off the air-conditioner and cut off the power supply before cleaning. Cleaning the indoor unit 1.Wipe the indoor unit with dry cloth . 2.If the indoor unit is very dirty, please wipe with wet cloth dipped by cold water. 3.The panel of indoor machine may be taken off.
Installation The machine must be installed correctly by licenced electrician according to the Installation Instruction . Guide of customer The customer should have a qualified power supply coincident with the tag of the air conditioner, its voltage should be in the range of 90-110% of its rated voltage. The power supply circuit should have leakage protector and air switch of which the capacity should be more than 1.5 times of the maximum current.
Need help?
Do you have a question about the ACP1 and is the answer not in the manual?
Questions and answers