D-Link dsl-520t Quick Installation Manual page 9

Configuring the Router (continued)
Dynamic IP Address Connections
If you selected the Dynamic IP Address connection type, select the Connection Type used for
encapsulation. If you have been instructed to change the VPI number and VCI number, type in
the new values. Click Next when you are ready to continue the Setup Completed window.
Click the Next button. Skip ahead to the Setup Completed window below.
An option for Dynamic IP Address connections is to use the MAC address from your
computer in place of the Router's actual MAC address for the purpose of Address Resolution
by the ISP's DHCP server. To implement this feature click on the Clone MAC Address
button before continuing to the next window.
Note
Change the VPI and VCI numbers as
instructed by your ISP. Type the new
values in the spaces provided here.
Select the Connection Type as
instructed by your ISP.
9