Bozz party cooler BWC10 Instruction Manual page 15

Notes
• The temperature in the fridge will depend on the temperature in the
surrounding area, the frequency and duration when the lid is open, and
the amount of objects inside the cooler. Therefore length of time may vary
for the unit to reach the desired temperature.
• Do not put too many cans and bottles inside the cooler. Leave some space
between them to allow good circulation and cooling function.
• Do not keep the lid open for long periods during operation; it will affect
the cooling temperature.
• If the power is cut; please do not open the door frequently (to avoid cool
leakage). If the power is off for a long period of time you can use dry ice
or cooling blocks to keep a low temperature.
Storage and Maintenance
Warning: To avoid electric shock, always unplug your party cooler before
cleaning and moving. Ignoring this warning may result in injury.
General: Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,
concentrated detergents, solvents or metal scouring pads. Some of these
chemicals may dissolve or damage and/or discolor your party cooler.
1. Disconnect the power plug from the wall outlet.
2. Remove the contents from the appliance.
3. Wipe the inside and outside with a damp cloth. By adding a small amount
of vinegar to the water you prevent mold and fungus.
4. Wipe all parts thoroughly after the cleaning.
Important: When the party cooler is not in use it must be completely dry and
clean inside to avoid mold growth. Leave the lid open during storage and
store the appliance in a ventilated area standing upright.
OPERATION
15