Operation - Bozz party cooler BWC10 Instruction Manual

OPERATION

Before Use
• Clean the inside of the party cooler with lukewarm water using a mild
detergent, and then wipe it thoroughly before use.
• The party cooler is designed to be operated on a flat surface. Avoid using
it in other positions. If the appliance must be tilted for handling or moving
purposes, allow it to stand in upright position for 20 to 30 minutes before
you plug it in and turn it on.
Note! If the appliance has been lying down it must stand upright for 24 hours
before operation, or else it will be damaged.
Adjust the Thermostat
• Turn the thermostat knob to choose
cooling level (located at the bottom of
the unit).
• The thermostat is graded from 0-7 where
0 is OFF and 7 is lowest temperature.
4-5: Normal condition (0-10 °C).
7: Fast cooling condition. Strong
cooling at lowest possible temperature.
The compressor will keep running
continuously.
Note! From 0 you can only turn the knob
clockwise. From 7 you can only turn the knob
anti-clockwise. 0 is start position and 7 is end
position.
Use
• Turn the power ON by connecting the power cable and check that the
unit is running.
• After approx. 30 minutes the temperature inside the cooler will cool.
When the cooler has been completely cooled down you can put your cans
and bottles inside.
• The cooling takes approx. 2-3 hours the first time.
14