XtremeMac MicroMemo User Manual page 3

English
Setup & Recording
1. Attach MicroMemo to the bottom of your
iPod nano 2g.
2. This will automatically switch the iPod nano
2g into Voice Memos mode. once in Voice
Memos mode, all recording and playback is
controlled using the iPod's click Wheel.
3. if using the included microphone or a similar
condenser microphone, make sure that
the switch above the microphone jack is
on Mic position. if using a powered stereo
microphone or other input, make sure the
switch is on line position.
4. To start recording, select 'Record'. During
recording, the on-screen timer will display
the length of your recording.
2
5. To pause recording, select 'Pause'. To
continue recording, select 'Continue'.
To stop recording, select 'Stop and Save'.
MicroMemo will end the recording and name it
with the current date and time.
note: Any accessory that is powered by the iPod will continue
to draw power from the iPod even when not in use. To preserve
battery power, please be sure to disconnect any accessory from
your iPod when not in use for an extended period of time.
Playback
1. Recordings are automatically stored under
Extras > Voice Memos in your iPod nano 2g.
2. To play a recording, scroll to the file you
want and select "Play".
English
3