Canon Pixma MP830 Quick Start Manual page 18

Rear View and Interior
(19) (20)
(31)
(30)
(19) Print Head Lock Lever
(20) Ink Tank Lamp
(21) Print Head Holder
(22) Scanning Unit
(Printer Cover)
(23) Inner Cover
(24) Card Slot
(25) Access Lamp
(26) Duplexing Transport Unit
(27) Power Connector
(28) Rear Cover
(29) External Device Jack
(30) Telephone Line Jack
(31) USB Connector
(for computer)
Chapter 1
(22)
(21)
(29) (28)
Used to fix the Print Head.
Lights or flashes red to indicate the status of the ink tank.
Used to install a Print Head.
This is the unit used to scan documents. Open when replacing the
ink tanks or clearing jammed paper.
Set the CD-R Tray here. Open when printing on a DVD/CD.
Set the memory card here.
Lights when a memory card is inserted into the Card Slot. This
lamp flashes while the machine is reading or writing data from/to
the memory card.
Open when clearing jammed paper after pulling out the Cassette.
This is the connector used to connect the provided power cord.
Open when clearing jammed paper.
Connects the external device.
Connects with the telephone line.
This is the connector used to connect the machine to a computer
using a USB cable.
(23)
(27)
(24) (25)
(26)
Introduction
17