Table of Contents
Advertisement
25C340
Front Panel
POWER
Press → On.
Press again → Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE SELECT
SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote
control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
LOCATION OF USER'S CONTROL
POWER
TV
FLASHBACK
PERSONAL PREFERENCE
A
VOL
—
MENU
REW
PAUSE
CHANNEL UP/DOWN
( ) Selects next higher channel.
VOLUME UP/DOWN
( ) Selects next lower channel.
(+) Increases sound.
• Press both at the same time to
(–) Decreases sound.
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel for
four seconds.
DVD
Press again → Removes display.
VCR
DISPLAY
INPUT
• Temporarily displays receiving
channel when in Closed Caption
1
2
3
mode.
4
5
6
INPUT
Press → Switch to external video
7
8
9
INPUT 1 mode.
ENTER
Press 2 times → Switch to external video
0
100
INPUT 2 mode.
Press 3 times → Switch back to the
B
C
D
original TV mode.
CH
VOL
+
CH
ENTER
MUTE
Used in some instances where a Cable
Converter Box requires an "enter"
CATV
TV
command after selecting channels,
DVD
VCR
when using the REMOTE KEYPAD
button.
PLAY
FF
CHANNEL UP/DOWN
CH/SKIP
STOP
REC
( ) Selects next higher channel.
( ) Selects next lower channel.
• Moves the "
screens.
TV • CATV • VCR • DVD
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
4
VIDEO/AUDIO IN2 TERMINALS
access the MAIN MENU screen.
" mark of the MENU
Advertisement
Table of Contents
