D-Link DSL-502T Quick Install Manual page 5

Connecting the Router to your
Computer cont...
For USB
4. Click Finish to complete the Installshield wizard.
When the USB driver has been installed, insert one end of the USB
cable included with the router into the DSL-502T router's USB port.
Insert the other end of the USB cable into a USB port on your PC.
Connect the power adapter to the power input at the back panel of the
DSL-502T and then plug the other end of the power adapter to a wall
outlet or power strip. On the front of the device, the Power LED will
turn ON to indicate proper operation. Insert the telephone cable
included with the Router into the ADSL port, and then connect the
cable to your telephone line. Check the LED display on the front of the
Router to confirm that the connections have been made.
5