Related Manuals for Link LD-7
Summary of Contents for Link LD-7
- Page 1 Revision 1 April 2012 LD-7 Seated Bicep Curl/Tricep Extension Owner’s Manual Serial Number Here Date of Purchase www.batcafitness.com LD-7 Owner’s Manual 1207 New Hope Road, Raleigh, NC - 919.255.1233 - www.batcafitness.com...
- Page 2 Instructions Congratulations on the purchase of your new Batca LD-7. This gym will provide you with a lifetime of enjoyment to meet your strength training needs. Batca Fitness Systems strives to build the best quality gyms and to package these gyms in such a way to avoid any damage during shipping.
-
Page 3: Table Of Contents
ITEM NO. PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY. BFM-51175 Weight Stack Pull Pin Bicep Curl/Tricep Extension Frame BFP-10893 BFP-10892 LD-7 Seat Frame Upholstery BFP-10901 LD-7 Short Cage BFP-10894 Base ITEM BFP-51861 Anti-Deflection Plate PART NUMBER DESCRIPTION QTY. - Page 4 Bolt Length Note: Bolt length is measured from the underside of the head of the bolt. Batca Fitness Systems LD-7 Owner's Manual...
- Page 5 LD-7 Owner’s Manual...
- Page 6 Batca Fitness Systems LD-7 Owner's Manual...
- Page 7 LD-7 Owner’s Manual...
-
Page 8: Item Part Number
FLAT WASHER. DO NOT TIGHTEN BOLTS UNTIL STEP 4 Figure 1 Item # Part # Description BFP-10893 Bicep Curl/Tricep Extension Frame BFP-10892 LD-7 Seat Frame BFP-10901 LD-7 Short Cage BFP-10894 Base BFP-51861 Anti-Deflection Plate BFP-50174 4 1/2” Pulley BFP-51750 SHCS 3/8” x 2 3/4”... -
Page 9: Guide Rod Plate
Top Weight Plate BFM-50632 Weight Stack Plate BFM-50529 Rubber Donut BFM-51175 Weight Stack Pull Pin BFP-51748 SHCS 3/8” x 3 1/4” BFH-50146 3/8” Flat Washer All Flat Washers and Nylocks are 3/8” unless otherwise noted. BFH-50157 3/8” Nylock www.batcafitness.com LD-7 Owner’s Manual... -
Page 10: Brace/Bearing Housing
BFH-50204 3/8” Curved Washer tube there is to be a 3/8” CURVED BFH-50146 3/8” Flat Washer WASHER instead of a 3/8” FLAT WASHER. BFH-50157 3/8” Nylock Batca Fitness Systems LD-7 Owner's Manual... - Page 11 Anywhere a washer is against 3/8” BFH-50204 3/8” Curved Washer the round side of a tube there is to be a CURVED WASHER instead of a 3/8” FLAT BFH-50146 3/8” Flat Washer WASHER. BFH-50157 3/8” Nylock www.batcafitness.com LD-7 Owner’s Manual...
- Page 12 Part # Description washer is against the round side of a tube BFP-10897 Bicep Curl/Tricep Ext Cam there is to be a 3/8” CURVED WASHER instead of a 3/8” FLAT WASHER. BFH-50165 1” Snap Ring Batca Fitness Systems LD-7 Owner's Manual...
-
Page 13: 6" Counter Weight
Bicep Curl/Tricep Ext. Arm BFP-10899 6” Counter Weight BFP-51885 Red Pivot Point Cap BFH-52364 SHCS 3/8” x 6” All Flat Washers and Nylocks are 3/8” unless otherwise noted. BFH-50146 3/8” Flat Washer BFH-50620 BHSCS 3/8” x 1” www.batcafitness.com LD-7 Owner’s Manual... -
Page 14: Bicep Curl/Tricep Ext. Handle Bar
Figure 7 Item # Part # Description BFP-10902 Bicep Curl/Tricep Ext. Handle Bar BFP-51210 Axle All Flat Washers and Nylocks are 3/8” unless BFH-50146 3/8” Flat Washer otherwise noted. BFH-50620 BHSCS 3/8” x 1” Batca Fitness Systems LD-7 Owner's Manual... -
Page 15: Double Pulley Cover
BFP-51752 SHCS 3/8” x 2 1/4” CAB-15011 BFH-50267 5/16” Nylock BFH-50146 3/8” Flat Washer BFH-50157 3/8” Nylock All Flat Washers and Nylocks are 3/8” unless otherwise noted. BFH-50227 Cable Strap End BFH-50351 1 3/8” Shoulder Bolt www.batcafitness.com LD-7 Owner’s Manual... -
Page 16: Chrome Chest Adjustment
BFH-50144 FHSCS 3/8” x 1” BFP-51752 SHCS 3/8” x 2 1/4” All Flat Washers and Nylocks are 3/8” unless BFP-51750 SHCS 3/8” x 2 3/4” otherwise noted. BFH-50146 3/8” Flat Washer BFH-50157 3/8” Nylock Batca Fitness Systems LD-7 Owner's Manual... -
Page 17: Shcs 3/8 X 1 1/4
Bicep Curl/Tricep Ext. Arm Pad BFP-52369 Bicep Curl/Tricep Ext. Chest Pad BFP-51653 SHCS 3/8 x 1 1/4” BFP-51747 SHCS 3/8” x 3” All Flat Washers and Nylocks are 3/8” unless BFH-50147 3/8” Lock Washer otherwise noted. BFH-50146 3/8” Flat Washer www.batcafitness.com LD-7 Owner’s Manual... - Page 18 HCS 3/8” x 3/4” BFP-51653 SHCS 3/8” x 1 1/4” All Flat Washers and Nylocks are 3/8” unless BFP-51697 SHCS 3/8” x 1 1/2” otherwise noted. BFH-50147 3/8” Lock Washer BFH-50146 3/8” Flat Washer Batca Fitness Systems LD-7 Owner's Manual...
- Page 19 Step 12: Figure 12 Item # Part # Description All Flat Washers and Nylocks are 3/8” unless BFP-51742 Right Front Weight Stack Shroud otherwise noted. BFP-51741 Left Front Weight Stack Shroud www.batcafitness.com LD-7 Owner’s Manual...
-
Page 20: Weight Stack Decals
Clean guide rods with a lint-free cloth and apply a thin layer of silicone lubricant (Part # BFH- 50262) to each guide rod. This will ensure a glass smooth performance from your weight stack. Batca Fitness Systems LD-7 Owner's Manual... -
Page 21: Cable Adjustments
Note: If the top plate raises off of the second plate in the weight stack, then the cable tension is too tight. You will need to take some of the tension out to lower the Top plate flush with the second plate. www.batcafitness.com LD-7 Owner’s Manual... -
Page 22: Preventive Maintenance
Upholstery Hand Grips Roller Pads Guide Rods Chrome Slides Frame Inspect Overall Safety Decals Cables Cable Tension Pulleys Hardware Stops Upholstery Hand Grips Frame Bushings Bearings Lubricate Guide Rods As Needed Bearings Replace Cables Batca Fitness Systems LD-7 Owner's Manual... -
Page 23: Limited Lifetime Warranty
This warranty applies only to the original purchaser and is not transferable. Claims under this war- ranty must be made directly to Batca Fitness Systems. Batca Fitness Systems 1207 N. New Hope Road Raleigh, NC 27610 (919) 255-1233 www.batcafitness.com www.batcafitness.com LD-7 Owner’s Manual... - Page 24 Layout Diagram The LD-7 has a layout dimension of 4’-0” (width) x 3’-9” (length) x 5’-0” (height). There should be a minimum of 18”, preferably 24”, of working space around the entire unit. Batca Fitness Systems LD-7 Owner's Manual...
Need help?
Do you have a question about the LD-7 and is the answer not in the manual?
Questions and answers