Contents Headset overview Be safe Charge, connect, configure Charge Connect Configure The basics Adjust the volume Pair Play/pause music* Mute Range LEDs and tones Support...
Headset overview Mute: Lift the boom to full stop Unmute: Lower the boom Increase volume Headset LEDs Power on/off Pair button Track forward Headset charge port Decrease volume Play/pause button Be safe Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.
Your headset works with any USB-compliant computer. The headset is automatically set as the active audio device once the wireless USB Adapter is plugged in. Go to Settings > Audio Devices and select: Input Device > Plantronics Gamecom 818 Output Device > Plantronics Gamecom 818 Output to Headphones > All Audio Volume Control >...
Mac OS X Go to System Preferences > Sound On the Output tab, select the “Plantronics GameCom 818” headset as the Sound Output device. Adjust the Output Volume Slider as necessary. Do not select the mute option. On the Input tab, select the “Plantronics GameCom 818” headset as the Sound Input device.
The basics Adjust the volume Tap the Volume up (+) or Volume down (–) button. NOTE For minimum volume, press and hold the (–) button. Pair Press and hold the headset Power button and the adapter Pair button for 4 seconds. The headset and adapter LEDs flash blue and turn solid blue when successfully paired.
LEDs and tones The following tables describe the headset LEDs and tones. Action/Status Tone Power on Steady blue glow 3 high tones Power off Steady red glow, then off 3 low tones Power low 3 high tones - played at 10 minute intervals Out of range Flashing blue...