Fitel S123M Manual

S123M Series
Hand-Held Ribbon Fiber Fusion Splicer
Hand-Held Ribbon Fiber Fusion Splicer

S123M ver.2 NEW Features

The S123M Series Hand-Held Ribbon Fiber Fusion Splic-
ers have been enhanced and updated to version 2. The
battery is automatically charged internally when con-
nected to AC mains power even during operation. The
new illumination lamp lights up a wide area around the
V-grooves and helps operation in low light environment.
The redesigned and strengthened heater simplifies the
protection sleeve loading process.

Features and Applications

With their low profile design and light weight bodies the S123M series offer not only ribbon fiber
splicing but also single fiber splicing with outstanding mobility and extreme ease-of-use. In addi-
tion, the rugged body is designed to endure harsh operating conditions by improving shock/impact
resistance with rubber pads embedded on 4 corners of the splicer body. It achieves water resistance
compliant IPX2 and dust resistance compliant IP5X.
The fast splice time and protection sleeve shrink time offers a highly efficient work environment.
Large battery capacity makes it possible to perform 70 cycles of splicing and heating for S123M4
and 160 cycles for S123M8 and S123M12 with two batteries, while it offers SOC solution as well.
By combining portability, ease-of-use, improved speed and durability, the S123M series become
and excellent option for use in the conventional telecommunications industry.
S123M8
S123M4
PRODUCT LINE UP
Model
S123M4-A
S123M4-B
S123M8
S123M12
S123M12
ver.2
IP52
RoHS
Application
Single to 4 ribbon fiber (with Soft Case)
Single to 4 ribbon fiber (with Hard Case)
Single to 8 ribbon fiber
Single to 12 ribbon fiber
NEW
NEW
5 Axis
Shock