Table of Contents
Advertisement
INTRODUCTION
This section introduces you to your new SX6000/SX4000 Projector,
provides a list of materials that comes with your projector and describes
the features and controls.
Introduction to the MultiSync SX6000/SX4000 Projector
The SX6000/SX4000 is one of the finest, most technically advanced
projectors available today. The SX6000/SX4000 enables you to project
exceptionally bright, precise images up to 500 inches across (measured
diagonally) from your PC or Macintosh computer (desktop or notebook),
VCR, document camera, laser disc player, DVD player and even an HD
VCR or HD laser disc player.
You can use the projector on a tabletop or cart, you can permanently
mount it on a ceiling*, or you can use the projector to project images
from behind the screen. The remote control can be used in a wired or
wireless configuration.
Features you'll enjoy :
• A high-performance 1.0 KW Xenon lamp that delivers 5000 ANSI
lumens (High Bright mode: SX6000) / 3,500 ANSI lumens (Variable
mode at max: SX4000) with a lamp life of 1500 hours.
TM
• NEC's unique DLP
based light engine offers true color reproduc-
tion.
• The SX6000/SX4000 can accommodate any picture size from 80 to
500 inches (measured diagonally).
• The SX6000/SX4000 projects images with uniform brightness while
colors remain true to their original source.
• The projector can be double or even triple stacked without an exter-
nal frame, producing bright images of 10,000 or 15,000 ANSI lumens
(SX6000) / 7,000 or 10,500 ANSI lumens (SX4000) in addition, double
or triple stacking offers built-in redundancy.
• An image can be projected from in front or behind a screen, and the
projector can even be installed on the ceiling*.
• Supports RGB digital, HDTV and DVD signals as well as most IBM
VGA, S-VGA, XGA, SXGA, UXGA (scaling), Macintosh or any other
RGB signals within a horizontal frequency range or 15 to 107 kHz
and a vertical frequency range of 24 to 105 Hz. This includes
NTSC3.58, PAL, PAL60, SECAM, NTSC4.43, Y/C and 1080i, 720P
and 480P HDTV standard video signals.
• Built-in telecine detection enables 3:2 pull-down correction with no
external processing necessary, eliminating jitter and artifacts to allow
for original film source motion quality.
• A newly designed menu system provides for easy setup and opera-
tion of the projector.
• The remote control can be used wired or wireless.
* Installing the projector on the ceiling must be done by authorized
NEC technicians.
Consult your NEC dealer for more information.
Digital Light Processing and DLP are trademarks of Texas Instruments.
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Taking a few minutes now to review the manual may
save you hours later on. At the beginning of each section of the manual
you'll find an overview. If the section doesn't apply, you can skip it.
What's In The Box?
Make sure your box contains everything listed. If any pieces are miss-
ing, contact your dealer. Please save the original box and packing ma-
terials if you ever need to ship the projector.
• SX6000/SX4000 Projector
• Remote Control with Remote Cable (wireless/wired).
• DVI-D Cable (SX6000 only)
• Power Cable (for North America and for Europe)
• Two AAA Batteries
• User Manual
• CompactFlash Memory Card (8MB) with Adapter
E – 1
Advertisement
Table of Contents
