Feed Cable And Room Thermostat Connections - termovana Stella Installation, Maintenance And User Manual

To power the boiler and connect the room thermostat, follow these steps:
1. Set the externally-fitted switch to the "OFF" position
2. Remove the lower flap to reach the terminal board.
3. Make all connections according to the indications in the diagram of the terminal
board; remember to thread the cables through the appropriate fairleads (remove the
attached flap to connect the room thermostat).
4. Fasten the fairleads and replace the flap door.
Warning
Feed cable and room thermostat connection
Do not connect the mains cable (230 V AC) to the room thermostat!
Doing this may damage the electronic board.
13