LG LA62 Series Owner's Manual page 5

LN57**-ZA
1
Stand Base
2
3
4EA
M4 x 14
3EA
P5 x 25
Stand Body
SETTING UP THE TV
CAuTiON
y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
y Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
y Removing the protective film (from the
bottom)
(Depending on model)
Protective film is temporarily attached to
prevent the surface of the product from
being damaged during delivery.
Once the TV has been installed, please
remove the protective film on the bottom of
the unit as shown in the figure.
y Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
A-5