Editing With Another Vcr; Index To Parts And Controls - Sony SLV-SE20 Service Manual

QQ
3 7 63 1515 0

Editing with another VCR

How to connect to record on this VCR
This VCR (Recorder)
LINE-2 IN
VIDEO/AUDIO
VMC-710HG/720HG audio/video
cable (not supplied)
This VCR (Recorder)
DECODER/
... LINE-3 IN
VMC-2121HG EURO-AV
cable (not supplied)
: Signal flow
Tip
• You can also use the LINE-1 (TV) connector instead.
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• If the other VCR doesn't have a EURO-AV (Scart) connector, use the VMC-2106HG
cable instead and connect the cable to the line out jacks of the other VCR.
64
Additional Operations
TE
L 13942296513

Index to parts and controls

Refer to the pages indicated in parentheses ( ) for details.
Front panel (SLV-SE30UX)
1 1/u ON/STANDBY switch/
indicator ( 32)
2
EJECT button (35, 55)
§
3 Tape compar tment
4 03 REW (rewind) button (35, 50)
5
· PLAY button (35, 51)
6 )# FF (fast-for ward) button (35,
50)
7 p STOP button (35, 65)
8 P PAUSE button (32, 35, 65)
www
.
70
Additional Information
http://www.xiaoyu163.com
TV
Other VCR (Player)
LINE OUT
TV
Other VCR (Player)
EURO-AV
(Scart)
9 r REC (recor d) button (38, 53, 65)
0 Remote sensor (5)
!¡
AUTO SET UP/
RF (Radio Frequency) CHANNEL
button (13, 14)
!™
PROGRAM/TRACKING +/–
buttons (52, 60)
!£
LINE-2 IN VIDEO/AUDIO jacks
(64)
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Operation
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT to display "L2"
("L1" or "L3") in the display window.
• Press SP/LP to select the tape speed, SP or LP.
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press P PAUSE.
3
Press r REC on this VCR to set it to recording pause.
4
To start editing, press the P PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the p STOP buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press P PAUSE on this VCR when an
unwanted scene begins. When it ends, press P PAUSE again to resume recording.
Note
• If you start editing following the procedure above, the VCR won't start recording
with the OPC function. To record a tape with the OPC function, press r REC again
during recording pause in step 3 so the VCR analyses the tape. Then, when you
start editing in step 4, press P PAUSE after the OPC indicator stops flashing. If you
press P PAUSE before the OPC indicator stops flashing, the OPC function is
cancelled.
Q Q
3 6 7 1 3
Front panel (SLV-SE45UX)
1
1/u ON/ST ANDBY switch/
indicator (32)
2
EJECT button (35, 55)
§
3
T ape compar tment
4
0 REW (rewind) button (35, 50)
5
) FF (fast-for ward) button (35, 50)
6
· PLA Y button (35, 51)
7
JOG button (52)
8
Shuttle ring (51)
.
1-16
9 4 2 8
P PAUSE
r REC
Additional Operations
1 5 0 5 8 2 9 9 4
9
p STOP button (35, 65)
!º
P PAUSE button (32, 35, 65)
!¡
r REC (recor d) button (38, 53, 65)
!™
Remote sensor (5)
!£
AUTO SET UP/
RF (Radio Frequency) CHANNEL
button (13, 14)
!¢
PROGRAM/TRACKING +/–
buttons (52, 60)
!∞
LINE-2 IN VIDEO/AUDIO jacks
(64)
continued
m
co
Additional Information
9 9
65
2 8 9 9
71