Recording Tv Programmes - Sony SLV-SE20 Service Manual

QQ
3 7 63 1515 0
Playing a tape (continued)
Notes
• The counter resets to "0:00:00" whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• The time counter does not appear on the TV screen when using an NTSC-recorded
tape.
• Depending on your TV, the following may occur while playing an NTSC-recorded
tape:
– The picture becomes black and white.
– The picture shakes.
– No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.
• While setting the menu on the TV screen, buttons for playback on the remote
commander do not function.
Starting playback automatically with one button
(One Touch Play)
If you use the SMARTLINK connection, you can turn on the VCR and the
TV, set the TV to the video channel, and start playback automatically with
one button.
1
Insert a tape.
The VCR automatically turns on.
If you insert a tape with its safety tab removed, the TV turns on and
switches to the video channel. Playback starts automatically.
2
Press · PLAY.
The TV turns on and switches to the video channel automatically.
Playback starts.
Tip
• When there already is a tape in the VCR, the VCR and the TV turn on, the TV is set
to the video channel, and playback starts automatically in one sequence when you
press PLAY.
·
Note
• When you use the One Touch Play function, leave the TV on or in the standby
mode.
36
Basic Operations
TE
L 13942296513
Recording TV programmes (continued)
3
INPUT SELECT
Press INPUT SELECT until a programme position number appears
in the display window.
4
• PROG Press PROG +/– to select the programme position you want to
record.
5
SP / LP Press SP/LP to select the tape speed, SP or LP.
LP (Long Play) provides recording time twice as long as SP,
however, SP (Standard Play) produces better picture and audio
quality.
6
REC Press r REC to start recording.
The recording indicator lights up red in the display window.
To stop recording
Press p STOP.
www
.
38
Basic Operations
http://www.xiaoyu163.com
SP VIDEO
OPC
SP VIDEO
OPC
VIDEO
LP OPC
VIDEO
Recording indicator
LP OPC
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Recording TV
programmes
1
Turn on your TV and set it to the video channel.
2
Insert a tape with its safety tab in place.
Q Q
3 6 7 1 3 1 5
To check the remaining time
Press DISPLAY. With the display on, press COUNTER/REMAIN to
check the remaining time. Each time you press COUNTER/REMAIN, the
time counter and the remaining time appear alternately. The remaining time
with the indicator also appears in the display window.
SP 0 : 0 0 : 2
Time counter
To correctly check the remaining time of the tape, set TAPE LENGTH in the
OPTIONS-1 menu according to the tape type you use (see page 63).
To watch another TV programme while recording
1
Press ... TV/VIDEO to turn off the VIDEO indicator in the display
window.
2
Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the safety
tab as illustrated. To record on a tape again, cover
the tab hole with adhesive tape.
co
.
1-9
9 4 2 8
COUNTER/
REMAIN
DISPLAY
SP/LP
TV/VIDEO
...
1 2 3
4 5 6
7 8 9
0
INPUT
SELECT
PROG +/–
r REC
p STOP
continued
Basic Operations
0 5 8 2 9 9 4 2 8
2
1 : 4
Remaining time
Safety tab
continued
m
Basic Operations
9 9
37
9 9
6
39