Example Three -Set Wlan To Be Wan As Wifi Client - LogiLink WL0129 User Manual

4.4.3 Example three –set WLAN to be WAN as WiFi Client
User Mr. ABC likes to configure this WLAN Broadband Router to be a WiFi client. In order to
communicate with another AP. Mr. ABC collects information and plans the WLAN Broadband Router
implementation by the following configuration.
WAN configuration: DHCP (Auto config)
IP Address
Subnet Mask
Default Gateway
Primary DNS Address
LAN configuration:
IP Address
Subnet Mask
DHCP Client Range
WLAN configuration:
SSID
Channel Number
WISP configuration:
SSID
Channel Number
Wireless Encryption
DHCP server
n/a
n/a
n/a
n/a
192.168.1.254
255.255.255.0
192.168.1.100 –192.168.1.200
RalinkInitAP_1906B8
1
TEST AP
Channel 1
n/a
192.168.88.50~192.168.88.150