Introduction; Introduction To The Projector - NEC HT410 User Manual

1. INTRODUCTION

1. INTRODUCTION

Introduction to the Projector

This section introduces you to your new NEC HT510/HT410 home entertainment Projector and describes its
features and controls.
Congratulations on Your Purchase of The HT510/HT410 Entertainment Projector
The HT510/HT410 is a sophisticated single chip DLP™ projector designed with the enhanced video require-
ments for the home entertainment user. With the HT510/HT410 you will enjoy projecting images up to 200"
(measured diagonally) from your DVD player, VCR, satellite hookup, HDTV source, PC or Macintosh computer
(desktop or notebook) and images from your digital camera. The HT510/HT410 can be setup on a coffee table,
tabletop, cart, bookshelf or permanently installed*
function remote, you will be ready to immerse yourself in big screen enjoyment.
Features you'll enjoy on the HT510/HT410 entertainment projector:
• 16:9 native wide screen display
• Exceptionally quite – as low as 26dB fan noise in Eco-Mode
• High resolution images - HT510 is a 1024 576 display, HT410 is a 854 480 display
• HDTV (1080i, 720p) and SDTV (576p, 480p) compatibility
• Manual vertical lens shift assists in projector to screen picture alignment
• Adjustable tilt rear foot for enhanced projector placement and alignment to the screen
• Eco-Mode™ technology – increases lamp life by up to 50% and reduces noise level to <26dB
• 3 video inputs – 1 component, 1 S-Video and 1 video for multiple video source connectivity
• Integrated deinterlace video processing technology
• Display popular wide screen and full screen aspect ratios - 16:9, 1.85:1, 2.35:1 and 4:3
• Built in speaker for an integrated audio solution
• Easy set up and operation
• High performance long life lamp for low total operating costs
• Wireless remote control operation
• Multiple video mode selections depending on your source
• Control the unit with a PC using the PC Control port
• NEC' s exclusive intelligent scaling and pixel blending technology provides for extremely accurate image
compression up to HDTV (1920 1080) and SXGA+ (1400 1050) display resolution*
• Supports most IBM VGA, SVGA, XGA, Macintosh, component signal (YCbCr/YPbPr) or other RGB signals
within a horizontal frequency range of 24 to 100 kHz and a vertical frequency range of 50 to 85 Hz. This
includes NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60 and SECAM standard video signals
NOTE: Composite video standards are as follows:
NTSC: U.S. TV standard for video in U.S. and Canada.
PAL: TV standard used in Western Europe.
PAL-N: TV standard used in Argentine, Paraguay and Uruguay.
PAL-M: TV standard used in Brazil.
PAL60: TV standard used for NTSC playback on PAL TVs.
SECAM: TV standard used in France and Eastern Europe.
NTSC4.43: TV standard used in Middle East countries.
1
* Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order to ensure proper operation and reduce
the risk of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in
accordance with any local building codes. Please consult your dealer for more information.
2
* HDTV 1080i (1920 1080), HDTV 720p (1280 720) and SXGA+ (1400 1050) are displayed with NECs
intelligent scaling technology.
Thank you for your purchase of the NEC HT510/HT410 home entertainment projector.
1
. With an extensive input panel, quick connect guide and full
E-1
2