Table of Contents
Advertisement
Setting up your microwave oven
Do not operate your oven if it is damaged.
Place the drive shaft into the hole in the oven floor. You may need to rotate it slightly until
it fits to the coupling correctly and slides down all the way. Place the turntable roller ring
into the recess in the oven floor. Place the glass turntable onto the shaft until the lugs on
the underside of the turntable engage with the drive shaft. Do not operate your microwave
oven without these items fitted.
q
w
e
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
1.
Glass turntable
2.
Drive shaft
3.
Turntable roller ring
4.
Oven light
5.
Waveguide cover
getting started
r
t
Advertisement
Table of Contents
