Advertisement
Available languages
Available languages
INg, BUT NOT LIMITED TO, DAMAgES fOR LOSS Of gOODWILL, LOSS Of REvENUE OR pROfIT, WORk STOppAgE, fAILURE Of OThER
EqUIpMENT TO WhIch A MAchINE IS cONNEcTED, LOSS Of INfORMATION OR MATERIALS ThAT ThE MAchINE IS USED WITh), OR
OThERWISE RESULTINg fROM ThE USE Of ThE MAchINE, RELATINg TO WARRANTy SERvIcE, OR ARISINg OUT Of ANy BREAch
Of ThIS LIMITED WARRANTy, EvEN If pROvO cRAfT hAS BEEN ADvISED Of ThE pOSSIBILITy Of SUch DAMAgES. ThE MAXIMUM
LIABILITy Of pROvO cRAfT UNDER ThIS LIMITED WARRANTy IS LIMITED TO ThE pURchASE pRIcE Of ThE MAchINE.
ThE fOREgOINg EXpRESS WRITTEN WARRANTIES AND REMEDIES ARE EXcLUSIvE AND ARE IN LIEU Of ANy OThER WARRANTIES OR
REMEDIES, EXpRESS, IMpLIED OR STATUTORy.
UNDER NO cIRcUMSTANcES IS pROvO cRAfT, OR ITS SUppLIERS OR RESELLERS LIABLE fOR ANy Of ThE fOLLOWINg EvEN If IN-
fORMED Of ThEIR pOSSIBILITy: 1) ThIRD pARTy cLAIMS AgAINST yOU; 2) SpEcIAL, INcIDENTAL, OR INDIREcT DAMAgES OR fOR ANy
EcONOMIc cONSEqUENTIAL DAMAgES; 3) LOSS Of OR DAMAgE TO ANy MATERIALS USED IN ThE MAchINE OR 4) LOST pROfITS,
BUSINESS REvENUE, gOODWILL, OR ANTIcIpATED SAvINgS.
SOME STATES OR jURISDIcTIONS DO NOT ALLOW cERTAIN EXcLUSIONS OR LIMITATIONS ON DAMAgES, SO ThE ABOvE LIMITATIONS
OR EXcLUSIONS MAy NOT AppLy TO yOU.
pROvO cRAfT is responsible for loss of, or damage to, your Machine only while it is 1) in pROvO cRAfT's possession or 2) in transit in those
cases where pROvO cRAfT is responsible for the transportation charges.
Governing Law
Both you and pROvO cRAfT consent to the application of the laws of the country in which you acquired the Machine to govern, interpret,
and enforce all of your and pROvO cRAfT's rights, duties, and obligations arising from, or relating in any manner to, the subject matter of
this Statement of Limited Warranty, without regard to conflict of law principles.
ThESE WARRANTIES gIvE yOU SpEcIfIc LEgAL RIghTS AND yOU MAy ALSO hAvE OThER RIghTS WhIch vARy fROM STATE TO STATE
OR jURISDIcTION TO jURISDIcTION.
Jurisdiction
All of our rights, duties, and obligations are subject to the courts of the country in which you acquired the Machine.
Part 2—Country-Specific Terms
cANADA
governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first sentence: "laws in the province
of Ontario."
UNITED STATES
governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first sentence: "laws of the State of
Utah."
jurisdiction: The following replaces "country in which you acquired the Machine" in the first sentence: "State of Utah."
Part 3—Warranty Information
This part 3 provides information regarding the Limited Warranty applicable to your Machine, including the warranty period and type of
warranty service pROvO cRAfT provides.
Warranty Period
The warranty period may vary by country or region.
A warranty period of 6 months on electronic parts and 90 days labor. A warranty period of 90 days on all non-electronic components. If a
failure of a non-electronic part occurs within 90 days of the original purchase date, pROvO cRAfT will repair or replace the component. you
will be responsible for returning the component to pROvO cRAfT for warranty service (refer to page 2 for instructions about shipping to
pROvO cRAfT).
Types of Warranty Service
If required, pROvO cRAfT provides repair or exchange service depending on the type of warranty service specified for your Machine as
described below. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response
time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional
charges may apply outside pROvO cRAfT's normal service area. contact your local pROvO cRAfT representative or your reseller for
country and location-specific information.
1.) customer Replaceable Unit ("cRU") Service
When applicable, pROvO cRAfT will provide a replacement cRU to you for you to install. cRU information and replacement instructions are
shipped with each cRU. Installation of a cRU is your responsibility. If pROvO cRAfT installs a cRU at your request, you will be charged for
the installation. When return is required, 1) return instructions and a container are shipped with the replacement cRU, and 2) you may be
charged for the replacement cRU if pROvO cRAfT does not receive the defective cRU within 30 days of your receipt of the replacement.
2.) courier or Depot Service
When applicable, pROvO cRAfT will provide you with a shipping container for you to return your Machine to a designated service center.
A courier will pick up your Machine and deliver it to the designated service center. following its repair or exchange, pROvO cRAfT will
arrange the return delivery of the Machine to your location. you are responsible for its installation and verification.
3.) customer carry-In or Mail-In Service
When applicable, you will deliver or mail as pROvO cRAfT specifies (prepaid unless pROvO cRAfT specifies otherwise) the failing Machine
suitably packaged to a location pROvO cRAfT designates. After pROvO cRAfT has repaired or exchanged the Machine, pROvO cRAfT will
make it available for your collection or, for Mail-in Service, pROvO cRAfT will return it to you at pROvO cRAfT's expense, unless pROvO
cRAfT specifies otherwise.
If you have any questions regarding these warranties, please contact us: www.provocraft.com/yourstory/warranty
yourStory
is intended for use only with provo craft consumables, such as book covers and laminating pouches. provo craft is not
™
responsible for damage, malfunction, or injury where the yourStory
yourStory
is an electrical device containing heating elements and requires due care in operation. The user must not operate the yourStory
™
where an electrical device or heating device should not ordinarily be used. hazardous environments where the yourStory
include, but are not limited to, areas where water or moisture, flammable liquids, explosive or corrosive gasses or substances, are present.
yourStory
™
shall only be used with provo craft consumables, of various minimum and maximum thickness, that define the capacity and
capability of yourStory
. The minimum/maximum BOOk BINDINg thickness are 0.004"/0.8" (0.12 mm/22 mm), respectively. The minimum/
™
maximum laminate thickness are 0.02 mm/0.5 mm, respectively. provo craft shall not be responsible in any way for the operator's failure to
comply with safe and ordinary operation of yourStory as described in this manual.
is used in connection with any non-provo craft product. Additionally,
™
™
™
shall not be used
Advertisement
