Digital Manual Search (Cable); Analogue Manual Search - Haier LET32T1000HF Instruction Manual

Getting started
Press the EXIT button to stop auto search during
searching.
Note
It may take a few moments to complete the auto
search.
Press the Menu button to exit the DTV search, ATV
search will continue.

Digital manual search (Cable)

Press the MENU button.
Press  to select Tuning, then press  to enter.
Press  to set Antenna ( Cable ) and Country.
Press  to select the option you require.
Press  to select Channel, then press OK to enter.
Press the number button on the remote control to
set the Frequency (KHz).
Press  to set the Modulation you require.
Press the number button on the remote control to
set the Symbol Rate(Ksym/s).
Press OK to start searching.
EN-13 Digital LED LCD television user's manual 13 Digital LED LCD television user's manual Digital LED LCD television user's manual
Once a channel is located, you can press OK to save
it.
Press the EXIT button to exit.

Analogue manual search

When you need to conduct a manual search, follow the
steps below:
Press MENU, then  to select Tuning and then
press the button to enter.
Press  to set Antenna (Antenna or Cable) and
Country.
Press  to select the option you require.
Press  to select Channels, then press OK to
enter.
Press  to select Analogue Manual Scan, then
press OK to enter.
Press the number button on the remote control to
set Frequency(MHz).
Press  to select Search Up and press OK to
search higher frequency channels.
Select Search Down and press OK to search lower
frequency channels.
Once a channel is located, you can press OK to save
it.
Press the EXIT button to exit.