Timeshift Recording; Instant Recording; Watching Recorded Programmes; Recording Confi Guration - Sharp LC-24DV250K Operation Manual

Hide thumbs Also See for LC-24DV250K:
Table of Contents

Advertisement

Note: Lip Sync delay may occur during the timeshifting.
Radio record is supported. The TV can record
programmes up to ten hours.
Recorded programmes are split into 4GB partitions.
If the writing speed of the connected USB disk is not
suffi cient, the recording may fail and the timeshifting
feature may not be available.
It is recommended to use USB hard disk drives for
recording HD programmes.
Do not plug out the USB/HDD during a recording. This
may harm the connected USB/HDD.
Multipartition support is available. The maximum of
two different partitions are supported. The fi rst partition
of the USB disk is used for PVR ready features. It also
must be formatted as the primary partition to be used
for the PVR ready features.
Some stream packets may not be recorded because
of signal problems, so sometimes video may freezes
during playback.
Record, Play, Pause, Display (for PlayListDialog)
keys can not be used when teletext is ON. If a
recording starts from timer when teletext is ON,
teletext is automatically turned off. Also teletext usage
is disabled when there is an ongoing recording or
playback.

Timeshift Recording

Press
(PAUSE) button while watching a broadcast
to activate timeshifting mode.In timeshifting mode, the
programme is paused and simultaneously recorded
to the connected USB disk. Press
again to resume the paused programme from where
you stopped. Press the STOP button to stop timeshift
recording and return to the live broadcast.
Note: Timeshift cannot be used while in radio mode.
Note : You cannot use the timeshift fast reverse
feature before advancing the playback with the fast
forward option.

Instant Recording

Press
(RECORD) button to start recording an
event instantly while watching a programme. You can
press
(RECORD) button on the remote control
again to record the next event on the EPG. In this
case, an OSD will be displayed, indicating the
programmed events for recording. Press
button to cancel instant recording.
Note: You can not switch broadcasts or view the Media Browser
during the recording mode. While recording a programme or
during the timeshifting, a warning message appears on the
screen if your USB device speed is not suffi cent.
01_[GB]_MB95S_4847UK_DVBT_C_24205LED_DVD_ROCKER_SILVER16_10081848_50232563_basic IB.indd 13
01_[GB]_MB95S_4847UK_DVBT_C_24205LED_DVD_ROCKER_SILVER16_10081848_50232563_basic IB.indd 13

Watching Recorded Programmes

Select the Recordings Library from the Media
Browser menu. Select a recorded item from the list (if
previously recorded). Press the OK button to view the
Play Options. Select an option then press OK button.
Note: Viewing main menu and menu items will not be available
during the playback.
Press the
return to the Recordings Library.
Slow Forward
If you press
programmes, the slow forward feature will be available.
You can use
button consecutively will change slow forwarding speed.
Recording Confi guration
Select the Recording Confi guration item in the
Settings menu to confi gure the recording settings.
Format Disk: You can use Format Disk feature
for formatting the connected USB disk. Your pin is
required to use the Format Disk feature (default pin
is 0000).
IMPORTANT: Note that ALL the data stored on the
USB disk will be lost and the disk format will be
converted to FAT32 if you activate this feature. If
your USB disk malfunctions, you can try formatting
the USB disk. In most cases formatting the USB disk
will restore normal operation; however, ALL the data
stored on the USB disk will be lost in such a case.
Note: If "USB is too slow" message is displayed on
(PLAY) button
the screen while starting a recording, try restarting the
recording. If you still get the same error, it is possible that
your USB disk does not meet the speed requirements. Try
connecting another USB disk.
Media Browser Menu
You can play photo, music, and movie fi les stored
on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the MENU button while in the
Media Browser mode will access the Picture, Sound
and Settings menu options. Pressing the MENU button
again will exit from this screen. You can set your Media
Browser preferences by using the Settings Menu.
(STOP)
Start playback with
activate
Start playback with OK and
activate
Start playback with OK/
activate
English - 13 -
(STOP) button to stop a playback and
(PAUSE) button while watching recorded
button to slow forward. Pressing
Loop/Shuffl e Mode Operation
and
TV plays next file and loop
the list.
the same fi le will be played in a
loop (repeat).
and
the fi le will be played in a shuffl e.
27.08.2013 13:36:10
27.08.2013 13:36:10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents