Repeat Printing - Brother P-touch PT-1700 User Manual

The Repeat function allows you to repeatedly print the same label up to nine
times.
To use the REPEAT PRINTING function:
It is recommended to set the TAPE FEED mode to "#", "##" or "###". (Please refer
to page 40.)
(1) Hold down the CODE key and press the REPEAT (
(2) The following message appears on the display:
(3) Select the number of labels you want. For example, if you want nine labels to
be printed, type 9.
(4) Press PRINT.
Press the CODE + FEED keys before cutting the tape if the TAPE FEED mode
is set to "-", "#", "##" or "###".
Note:
Press
A maximum of nine copies can be printed.
Cutting is not done automatically.
Before starting a repeat print, check that there is sufficient tape in the
cartridge.
Never try to cut the tape during printing.
Press the ON/OFF key immediately if the tape runs out before all the
printing is finished. (striped tape will appear.)

REPEAT PRINTING

A
CAPS
CLEAR
DEL
before printing; the previous screen reappears.
A A
A
A
1 - 9 ?
STL UNDL/FRM
-35-
W
) key.
REPEAT