Dv Rec Audio; Tv Rec Audio; Auto Chapter; Disc - NEC NDR50 Owner's Manual

Before Operation (Continued)

DV Rec Audio

You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
Rec Mode Set
Rec Aspect
DV Rec Audio

TV Rec Audio

Auto Chapter

TV Rec Audio
When TV recording with bilingual, you can choose
audio channel to record.
Main+Sub: Main language and Sub language
Main: Main language only
Sub: Sub language only
Rec Mode Set
Rec Aspect
DV Rec Audio
TV Rec Audio
Auto Chapter
Auto Chapter
When recording, chapter markers are put in specified
setting. You can change this interval to 5 minutes,
10 minutes, or 15 minutes. If you select None, switch off
automatic chapter marking altogether with the No
Separation setting.
Rec Mode Set
Rec Aspect
DV Rec Audio
TV Rec Audio
Auto Chapter
26

Disc

Disc Format

If you load a completely blank disc, the recorder will ini-
tialize the disc.
Also, you can format the disc from the Setup menu as
Audio 1 below.
Audio 2
1 1
2 2
3 3
Main+Sub
4 4
Main
Sub
5 5
6 6
7 7
8 8
None
5 Min
10 Min
15 Min
If you want to change the disc format, everything
recorded on the disc will be erased.
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
DVD-RW: The recorder initialize the disc to VR mode.
DVD+R: The Initialize menu will appears. Select "Yes"
then press ENTER.
DVD+RW: The recorder initialize the disc to DVD+RW
mode.
Disc Format
Finalize
Disc Label
Disc Protect
Press SETUP.
The Setup menu appears.
Use v / V to select the Disc option.
While the Disc option is selected, press B to
move to the second level.
Use v / V to select the Disc Format option.
Press B to move to the third level.
Start icon is highlighted.
Press ENTER.
Disc Format menu appears.
In case of DVD-RW, use b / B to select a desired
Disc Format Mode (VR Mode or Video Mode)
then press ENTER.
In case of DVD+RW, go to step 8.
Disc Format
Select a Mode
VR Mode Video Mode
Use b / B to select "Ok" then press ENTER.
It takes a few moments to format the disc.
Disc Format
All data on the disc will be deleted.
Proceed?
Ok Cancel
Caution
Start