Table of Contents
Advertisement
PROGRAM SELECTION (FROM 0 TO 99)
Direct selection
Use the remote control NUMBER 0....9 buttons (A3).
For two digits program numbers, enter the second
digit within 2 seconds.
SOUND CONTROL
Volume adjustment
Use the remote control VOLUME
UP (A20) / DOWN (A7) buttons or
the TV set front panel VOLUME UP
/ DOWN buttons (B8).
Mute
Mute the sound by pressing the remote control
SOUND MUTE button (A2).
Then,
logo is displayed. The previous sound
setting is returned after pressing the same button
a second time.
If a sound related function is used (e.g. VOLUME,
3D) then the MUTE will also be cancelled.
Manufactured under license from Dolby Laboratories, "Dolby"
and the double-D symbol are trademarks of Dolby Laboratories.
8
Up / Down selection
Use the remote control PROGRAM UP (A6) / DOWN
(A21) buttons or the TV set front panel PROGRAM
UP / DOWN buttons (B9).
Mono forcing, dual language
- If you are unable to get good sound
quality for a program due to poor
reception, you can force a change
from stereo to mono transmission by
pressing the remote control MODE
button (A14). Then the program status
display will indicate "MONO" with a
icon.
- On the other hand, during a program
with dual language transmission, the
MODE button (A14) allows you to
toggle between the first and second
language. The program status
display will indicate "DUAL 1" or
"DUAL 2" (plus NICAM according to
the received signal).
- To return to initial state, press again
the MODE button (A14).
Sound effects
A SPATIAL sound effect is available, using the remote
control 3D (A13) button.
The following display appears:
SPATIAL
Spatial sound effect
Sound transmission mode
STEREO
18:20
Clock
To return to initial sound effect, press again the 3D (A13) button.
The following display appears:
OFF
No sound effect
Sound transmission mode
STEREO
18:20
Clock
As an option, the sound effects PANORAMA and Dolby Virtual are
available with the same button. For other adjustments such as
BALANCE, EQUALIZER or AVL(option), use the SOUND menu
(page11).
PICTURE CONTROL
You can select three pictures settings, by using the remote control NORMAL button (A17) :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE
REDUCTION, use the PICTURE menu.
If an NTSC signal is received, then the TINT adjustment will also be available.
01
ABC
01
ABC
NORMAL I
NORMAL II
1 8 : 2 0
1 8 : 2 0
FREEZE picture
This TV scans at 100Hz. It has an additional FREEZE picture function that holds the current image on the screen (similar in effect to
the "pause" function of a video player). To freeze the image at any time, just press on the yellow FREEZE button (A26). This
function is available with any signal source (from aerial, video player, DVD).
The display will indicate that the FREEZE function is activated. A second press on the same button (A26), entry to the MAIN menu
(A19), or change of program will cancel the FREEZE function.
PROGRAM STATUS
Channel number
DISPLAY (Recall)
Use the remote control RECALL button (A16) to display (for 4 seconds only) program status
information. This display appears also after a program selection or after switching on the TV set.
SLEEP FUNCTION
The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP
button (A4), you can enter one of the following settings :
OFF > 20 min > 40 min > 60 min > 80 min > 100 min > 120 min > OFF
The SLEEP time remaining (before TV turn-off) can be seen again at any time by one
touch on the remote control SLEEP button (A4).
A second touch (while the status display is active) will modify the SLEEP time
remaining.
FORMAT SELECTION
The following picture formats are
AUTO setting :
available:
If picture format signalling data is
AUTO> 4:3 > 14:9 > ZOOM 14:9 > ZOOM
received, then the most appropriate
16:9 > FULL SCREEN > PANORAMA >
ZOOM format will be automatically
FAVOURITE > AUTO.
selected. In the absence of this data, the
default ZOOM format will be selected(see
page 13, ZOOM AUTO function under
FEATURES MENU).
Otherwise, the preferred mode of the user
can be forced by repeated pressing of the
remote control ZOOM button (A15):
01
ABC
FAVOURITE
1 8 : 2 0
01
ABC
Channel name
MONO
Sound transmission Mode:
Displayed with forced icon(
1 8 : 2 0
Clock
only if forced to mono by
MODE button (A14)
01
ABC
STEREO
Remaining time (minutes)
before TV set switches off
2 0
FAVOURITE Format
This contains the users preferred format setting. In order to enter new
settings, proceed as follows:
- Navigate the list of available formats with the ZOOM button (A15) until
FAVOURITE is selected.
- While the selection FAVOURITE is active on the screen, the format can
be manipulated by use of the CURSOR LEFT (A7), RIGHT (A20) buttons
(to change the horizontal size) and the CURSOR UP (A6) or DOWN (A21)
buttons (to change the vertical size).
- The controls CURSOR RIGHT (A20) and CURSOR UP (A6) increase the size.
- The controls CURSOR LEFT (A20) and CURSOR DOWN (A6) decrease the size.
- The new settings are automatically memorized in the FAVOURITE format.
If the OSD status display FAVOURITE is at any time lost (timeout is 3-4
seconds after any previous use of the CURSOR keys), then a single touch
of the ZOOM button (A15) is necessary before adjustment can be resumed.
)
9
Advertisement
Table of Contents
