NEC MultiSync XV17+ User Manual page 18

OSM Menus
Note on Controls in the Geometry Controls Menu:
EXIT: exits to the main menu.
Cursor / : moves the highlighted area up/down to select one of the
choices.
Cursor +/-: moves the bar in the + or – direction to increase or decrease
the adjustment.
RESET: resets the current highlighted control to the factory setting.
Tools
Provides a list of optional adjustments which include the following:
Language: OSM menus are available in 6 languages.
OSM Position: You can choose where you would like the OSM image
to appear on your screen. Selecting OSM location allows you to
manually adjust the OSM menu left, right, up, or down.
OSM Turn Off: The OSM menu will stay on as long as it is in use. In
the OSM Turn Off sub-menu, you can select how long the monitor waits
after the last touch of a button to shut off the OSM menu. The preset
choices are 10, 20, 30, 60, 120 seconds.
OSM Lockout: This control completely locks out access to all OSM
functions. When attempting to activate OSM while in the lockout mode,
a screen will appear indicating that OSM is locked out. To activate the
OSM Lockout function, press PROCEED, then " " and hold down
simultanously. To de-activate the OSM Lockout, press PROCEED,
then " " and hold down simultanously.
Linearity: The Linearity selection allows you to adjust the spacing of
the areas on the screen. The purpose of this control is to ensure that a 2
cm circle is a true 2 cm circle wherever it is drawn on the screen. The
best way to determine the vertical linearity is as follows:
–
Draw equally spaced horizontal lines using a drawing
application that has a ruler.
–
Use the Vertical control to adjust the spacing between the lines
near the centre of your screen.
E - 13