NEC MultiSync LCD1980SXI LCD1980SXI LCD1980SXI User Manual page 55

Appendix
OSM Position You can choose where you would like the OSM control image to
appear on your screen. Selecting OSM Location allows you to
manually adjust the position of the OSM control menu left, right,
down or up. Press "SELECT" to move the adjustment menu, and press
"+" or "-" to adjust.
OSM Turn off The OSM control menu will stay on as long as it is in use. In the OSM
Turn Off submenu, you can select how long the monitor waits after the
last touch of a button to close the OSM control menu. The preset
choices are 10-120 seconds in 5-second increments. Press "+" or "-"
to select.
OSM Lock Out This control completely locks out access to all OSM control functions.
When attempting to activate OSM controls while in the Lock Out
mode, a screen will appear indicating the OSM controls are locked
out. There are three types of OSM LOCK OUT:
OSM LOCK OUT with BRIGHTNESS and CONTRAST control: To
activate the OSM Lock Out function, press SELECT, then "+" key and
hold down simultaneously. To deactivate the OSM Lock Out, press
SELECT, then "+" key and hold down simultaneously while in the OSM
menu. BRIGHTNESS and CONTRAST can be adjusted while in the
lock out mode.
OSM LOCK OUT with no control: To activate the OSM Lock Out
function, press SELECT, then ">" key and hold down simultaneously.
To deactivate the OSM Lock Out, press SELECT, then ">" key and hold
down simultaneously while in the OSM menu. No controls can be
adjusted while in the lock out mode.
OSM LOCK OUT with BRIGHTNESS (only) control: To activate the
OSM Lock Out function, press SELECT, then "–" and "<" keys and
hold down simultaneously. To deactivate the OSM Lock Out, press
SELECT, then "+" key and hold down simultaneously while in the OSM
menu. BRIGHTNESS can be adjusted while in the lock out mode.
OSM Rotation To switch OSM between Landscape and Portrait modes. Press "+" or
"–" to select.
Resolution Notifier The optimal resolution is 1280 x 1024. If ON is selected, a message
will appear on the screen after 30 seconds, notifying you that the
resolution is not set to 1280 x 1024. Press "+" or "–" to select.
LED Brightness Controls the brightness of the LED on the monitor, "OFF", "MID" and
"MAX".
Factory Preset Selecting Factory Preset allows you to reset most OSM control settings
back to the factory settings. Highlighting the control to be reset and
pressing the set to 1280 x 1024. Press "+" or "–" to select.
Tag8
RapidMotion This mode can be used when viewing moving video (such as DVD or
MPEG) on the monitor. RapidMotion will bypass video reproduction
without ghosting or digital artifacts. For best results, RapidMotion
should be used while in native resolution (1280 x 1024).
LCD1980SXimanual060704.p65
–continued
53
53 6/10/04, 9:28 AM