Philips GC1900 series Manual page 14

EnGlish
14
3 Specific types only: put the iron in the heat-resistant storage cover
and fasten the cover with the Velcro strips (Fig. 22).
Note: If you use the heat-resistant soleplate cover, you do not have to let the
iron cool down first. If you want to store the iron without the soleplate cover,
let it cool down first.
environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 23).
guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your
country.
Problem
The iron is
plugged in, but
the soleplate
is cold.
Possible cause
There is a
connection
problem.
The temperature
dial is set to MIN.
Solution
Check the mains cord, the plug
and the wall socket.
Set the temperature dial to the
required position.