Proper Use - EINHELL TE-MS 2112 L Original Operating Instructions

operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Crosscut and miter saw
•
Adjustable workpiece support (left + right)
•
Clamping device (8)
•
Sawdust bag (22)
•
Allen key 6 mm (c)
•
Allen key 4 mm (d)
•
Transport handle
•
Original operating instructions
•
Safety information

3. Proper use

The crosscut and miter saw is designed for cross-
cutting wood and wood-type materials which are
appropriate for the machine's size. The saw is not
designed for cutting fi rewood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The equipment is to be operated only with suita-
ble saw blades. It is prohibited to use any type of
cutting-off wheel.
Anl_TE_MS_2112_L_SPK7.indb 25 Anl_TE_MS_2112_L_SPK7.indb 25
GB
To use the equipment properly you must also
observe the safety information, the assembly
instructions and the operating instructions to be
found in this manual.
All persons who use and service the equipment
have to be acquainted with these operating
instructions and must be informed about the
equipment's potential hazards. It is also imperati-
ve to observe the accident prevention regulations
in force in your area. The same applies for the
general rules of health and safety at work.
The manufacturer will not be liable for any chan-
ges made to the equipment nor for any damage
resulting from such changes. Even when the
equipment is used as prescribed it is still impossi-
ble to eliminate certain residual risk factors.
The following hazards may arise in connection
with the machine's construction and design:
•
Contact with the saw blade in the uncovered
saw zone.
•
Reaching into the running saw blade (cut
injuries).
•
Kick-back of workpieces and parts of work-
pieces.
•
Saw blade fracturing.
•
Catapulting of faulty carbide tips from the saw
blade.
•
Damage to hearing if essential ear-muffs are
not used.
•
Harmful emissions of wood dust when used
in closed rooms.
4. Technical data
AC motor: ........................................ 230 V ~ 50Hz
Power: .........................................1400 W S6 20%
Idle speed n : .......................................5000 min
0
Carbide saw blade: ............ø 210 x ø 30 x 2.8 mm
Number of teeth: .............................................. 48
Swiveling range: ............................. -47° / 0°/ +47°
Miter cut to the left: ..................................0° to 45°
Saw width at 90°: ............................. 120 x 60 mm
Saw width at 45°: ............................... 83 x 60 mm
Saw width at 2 x 45°
(double miter cut left): ........................ 80 x 34 mm
Weight: ............................................ approx. 10 kg
Laser class: ....................................................... 2
Wavelength of laser: ................................ 650 nm
Laser output: ............................................ ≤ 1 mW
- 25 -
-1
07.02.13 16:50 07.02.13 16:50