Pre-Dialing Function; Redial Function; Reviewing, Calling Back And Deleting Incoming Numbers; Reviewing, Calling Back And Deleting Outgoing Numbers - ideus ITCAB400 User Manual

USER GUIDE

PRE-DIALING FUNCTION

When the handset is on the base, dial the desired number.
If there are mistakes, use the DEL key to edit.
Pulse the HANDSFREE key or pick up the handset and the number will be dialed
automatically.

REDIAL FUNCTION

Pick up the handset or Pulse the HANDSFREE key,
Press REDIAL key, the last dialed number will be dialed again

REVIEWING, CALLING BACK AND DELETING INCOMING NUMBERS

Reviewing
In on-hook state, press ▲ or ▼ key to scroll and review the numbers.
Deleting
In on-hook state, when the desired number is shown, press DEL key, the number is deleted. Or
press and hold DEL key for 3 seconds, all the reviewed incoming numbers are deleted.
Calling back
In on-hook state, scroll to the desired number, press HANDSFREE or REDIAL key or pick up the
handset, the number is dialed out. Or press REDIAL key twice, the telephone will add the long
distance code ahead the number automatically and then dial back.
Note: If the PABX code is set, the telephone will detect and add the PABX code before the
number automatically and then dial back. It will dial the PABX code first and then after a 2
second pause and then dial the number.

REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS

Reviewing
In on-hook state, press OUT key, then repeat to press OUT to review outgoing numbers one
by one.
Calling back
In on-hook state, press OUT key to review the desired number, then press HANDSFREE or
REDIAL key or pick up the handset, and the number is dialed out.
Deleting
In on-hook state, press OUT key to scroll to the desired number.
Press DEL key and the number is deleted
Or press and hold DEL key for 3 seconds, all numbers will be deleted.
PREVENTING FSK MESSAGE TO AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, you can prevent real time
auto adjustment as follows:
In on-hook state, press and hold ALARM/P key for 3 seconds, LCD displays DATE ON,
Press ALARM/P key again, LCD displays DATE OFF,
Press SET key to quit.
Note: DATE OFF: Does not allow real time auto adjustment.
ITCAB400
17
EN