Getting Started; Sleep Monitoring Function; Playing Ipod Music/Listening To Fm Radio; General Controls - Gear4 Renew SleepClock User Manual

Renew SleepClock
Product Features:
■ App-enhanced clock radio
■ 12 / 24 hour clock with alarm - wake up to
radio, your iPod / iPhone / iPad or wake up
sound
■ Integrated body movement sensor - this high
precision sensor can determine your sleep
state and give you full statistics of your night's
sleep through the Renew SleepClock app
■ Dimmable LED display
■ 2 programmable wake up times, optimized to
your sleep
■ FM radio
■ Charges iPod / iPhone / iPad
■ Line-in port for use with other music players

Getting started:

■ Plug the power cable into the back of the unit
and then into the mains supply.
■ To turn on the speaker, press the Power
button ( ).
■ Carefully insert your iPod touch / iPhone /
iPad into the dock.
■ On your iPod touch / iPhone / iPad, a dialog
box will inform you the accessory requires an
app. Tap Yes to go to the App Store page
2 GEAR4 | Renew SleepClock | User Manual
Please read before use.
where you can download the free Renew
SleepClock app.
■ Launch the app to fully start using your
speaker. Full instructions on the app are
available on the GEAR4 website.
Note: You can also download the app from the
App Store by searching for GEAR4 or Renew
SleepClock.
■ To select the mode, press the MODE button to
scroll between the options (iPod / FM / AUX).
Using the Sleep Monitoring
Function:
■ Renew SleepClock integrates a sleep monitor
sensor.
■ The non-contact sensor is a very low power
Radio Frequency (RF) emitter. The RF power
levels are much less than the Bluetooth on a
cell phone or a WiFi router. The sensor has a
maximum range of 1.5m and is designed to
measure the breathing and body movement
of an adult.
■ This sensor works in conjunction with the
Renew SleepClock app available from the
App Store. For the sensor to work properly,
your iPod touch / iPhone / iPad should be
docked and the Renew SleepClock app
running in the foreground.
PLACING RENEW SLEEPCLOCK
CORRECTLY:
■ The product should be placed on a bedside
table on the same side of the bed as you.
The height of the bedside table should
ensure that there is a clear line of sight
between the sensor and your upper chest
when you are lying on the bed.
■ This is typically a table top height of level with
the mattress to around 6" (15cm) above the
mattress. Do not place the product so that it
has to "look" through the mattress at you. The
product should be placed on the bedside
table such that it is within easy arm's reach of
your normal sleeping position.
■ When you press the Go to sleep button in the
application, you will have the opportunity to
check a live feedback of the sensor and ensure
the position of Renew SleepClock is correct.
Playing iPod music:
■ Press the MODE button to select iPod mode.
■ Carefully insert your iPod touch / iPhone /
iPad into the dock.
■ Launch the Renew SleepClock app and tap
the Music tab (bottom right) and select the
song to play.
■ You can also use the standard iPod music
player. Simply exit the Renew SleepClock
application by pressing the home button and
launch the iPod player.
Listening to FM radio:
Note: The FM functionality does not require an
iPod touch / iPhone / iPad to be docked.
■ Press the MODE button to select FM mode.
■ Press the SCAN button to scan to the next
available clear frequency.
■ You can also enjoy greater control over your
listening experience by opening the Renew
SleepClock app and selecting Music > FM.

General controls:

■ The Renew SleepClock is designed to be
automatically setup by its companion app.
■ Should you not wish to use the app, you can
set up certain functions manually. It is
always recommended to use the app as it is
much easier.
User Manual | Renew SleepClock | GEAR4 3