Descaling - Kuchef KE2400 Instruction Manual

1.7l kettle
Hide thumbs Also See for KE2400:
Table of Contents

Advertisement

Descaling/Removing Mineral Deposits
Due to using tap water, your Kettle may appear discoloured inside from mineral deposits
over time. This is not rust and can be easily managed by following the below instructions.
WARNING: To prevent damage to the appliance do not use alkaline cleaning agents when
cleaning or metal scourers; use a soft cloth and mild detergents.
To remove the mineral deposits you can purchase kettle descaler products from most
leading supermarkets, department stores and hardware stores. Be sure to read the
instructions before use.
Alternatively you can use everyday household products to clean your Kettle as well.
1. Open the Kettle lid and fill with 3 cups of white vinegar and top up with water to
maximum level. Allow to stand overnight. DO NOT BOIL.
2. Remove the solution, refill with fresh water and bring to the boil then discard the
water. Repeat and this should remove any build ups.
Storage
Ensure the kettle is turned off, unplugged, clean and dry before storing it. Stow the cord
beneath the base unit and make sure the lid is closed and the kettle is correctly attached
to the base. Do not store anything on top of the kettle.
14

Advertisement

Table of Contents
loading

Table of Contents