Advertisement
Quick Links
Installing the BreezeMAX Si Residential Gateway
Introduction
Overview
The WiMAX Residential Gateway is an indoor WiMAX subscriber station designed to
provide Internet access for a home or small office. The device provides a gateway function
between a WiMAX service provider and a local Ethernet LAN.
The WiMAX Residential Gateway includes up to four RJ-45 Ethernet switch ports for LAN
connections and two RJ-11 Voice over IP (VoIP) phone ports. An optional 802.11g module
is available for some models that provides a Wi-Fi access point service. All models provide a
web-based management interface for the configuration of all features.
Package Checklist
•
WiMAX Residential Gateway
•
AC power adapter
Detachable WiMAX Antennas
•
Software Utilities and User Guide CD
Optional Extras
Backup power supply
Ethernet cable
P/N: 215152
- 1 -
November 2008
Advertisement
Related Manuals for WiMAX breezemax si
Summary of Contents for WiMAX breezemax si
- Page 1 Internet access for a home or small office. The device provides a gateway function between a WiMAX service provider and a local Ethernet LAN. The WiMAX Residential Gateway includes up to four RJ-45 Ethernet switch ports for LAN connections and two RJ-11 Voice over IP (VoIP) phone ports. An optional 802.11g module is available for some models that provides a Wi-Fi access point service.
- Page 2 Installing the BreezeMAX Si Residential Gateway Features • Models for 2.3 GHz, 2.5 GHz or 3.5 GHz operation, with omnidirectional or switched-beam antennas • Includes up to 4 LAN ports and an optional Wi-Fi module • Two VoIP ports that allow standard (analog) phones to make VoIP calls using Session Initiation Protocol (SIP) •...
- Page 3 Installing the BreezeMAX Si Residential Gateway Scan Button: • Press the button to perform a scan of the known frequencies channels. System Status Indicator: • Green — WiMAX network access completed. Blinking indicates authentication in progress. • Orange — WiMAX network entry in progress or unit in scan mode.
- Page 4 Installing the BreezeMAX Si Residential Gateway Antennas: • Two antennas for wireless communications. Either omnidirectional or switched-beam antennas, depending on model. RJ-45 LAN Ports: • Four 10/100 Mbps Ethernet ports for connections to PCs or other Local Area Network (LAN) devices. All ports support...
-
Page 5: Installation
Installing the BreezeMAX Si Residential Gateway Installation Overview Before installing the BreezeMAX Si Residential Gateway, verify that you have all the items listed in the package checklist. If any of the items are missing or damaged, contact your BreezeMAX Si service provider. - Page 6 Installing the BreezeMAX Si Residential Gateway - 6 - P/N: 215152 November 2008...
- Page 7 Connect a standard (analog) telephone set to the RJ-11 VoIP ports using standard telephone cable. The WiMAX Residential Gateway enables VoIP calls to be made through the unit using a regular (analog) telephone set connected to a VoIP port, or from PCs or other network devices connected to the LAN ports.
- Page 8 Gateway, refer to the User Guide. Place the Software Utilities and User Guide CD into the CD drive of the PC. This enables the Basic Setup to copy the WiMAX operator's settings to the gateway. - 8 - P/N: 215152...
- Page 9 Installing the BreezeMAX Si Residential Gateway 7. In the WiMAX Login page, enter the user name and password required to gain access to the WiMAX network and click Apply. The settings on the operator- supplied CD are copied to the gateway, then the unit reboots and attempts to connect to the specified WiMAX network.
- Page 10 Installing the BreezeMAX Si Residential Gateway FCC Information: The Subscriber Unit equipment has been tested and found to comply with the limits for a class B digital device, pursuant to ETSI EN 301 489-1 rules and Part 15 of the FCC Rules.
Need help?
Do you have a question about the breezemax si and is the answer not in the manual?
Questions and answers