Assembly - Ryobi P232 Operator's Manual

KNOW YOUR IMPACT DRIVER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BIT STORAGE
When not in use, bits provided with the impact-driver can be
placed in the storage area located on base of the handle.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
The direction of rotation (forward/reverse/center lock)
selector located above the switch trigger will change the
direction of bit rotation.
LED WORKLIGhT
The LED worklight, located on the front of the tool, illuminates
when the switch trigger is depressed. This provides extra
light for increased visibility.
MAG TRAY™ (SCREW hOLDER)
The magnetic tray conveniently stores screws or other
small parts.
VARIABLE SPEED SWITCh TRIGGER
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-55-579 for assistance.
PACKING LIST
Impact Driver
Standard Bit
Adaptor Bit
Operator's Manual
FEATURES
BUILT-IN
COUPLER
LED WORKLIGHT
MAG TRAY
(SCREW HOLDER)
BIT STORAGE

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
7 — English
DIRECTION OF
ROTATION SELECTOR
™
SWITCH
TRIGGER
Fig. 1