Page 1
REVERSE OSMOSIS SYSTEM Address ERS-105 USER'S MANUAL Introduction of ERS-105 What is reverse osmosis Components & Selected filters Cartridge filters The parts of ERS-105 Tubing connection diagram Installation diagram Change filters Change membrane Operation regulation Maintenance checking list Memo Thank you very much for selecting Pure-Pro Water Corp.
Introduction of ERS-105 ¨ERS-105 Quick-change RO system Filters ® PurePro Quick-Change RO system uses the most advanced water treatment technology: "Reverse Osmosis". Reverse Osmosis (RO) is recognized as one of 1st stage 2nd stage 3rd stage 4th stage 5th stage Other items the best available technologies for producing best quality drinking water.
Page 3
Reverse osmosis is the reversal of the natural flow of osmosis. In a alternative to bad-tasting tap water. Also, PurePro eliminates most of the lime water purification system, the goal is not to dilute the salt solution, but to build up on drip coffee makers, preventing the need for frequent cleaning.
Page 4
Mineral cartridge filter TDS meter The taste of the PurePro water depends on the amount of contaminants in the tap water originally. If 95% of dissolved minerals and chemicals are removed, the R.O. water may taste like distilled water (no minerals), bottled water (low...
Post Carbon Filter drinking water. We are using NSF approved post carbon to guarantee the taste of water. ERS-105 Quick-Change RO Systems ERS-105 Quick-Change RO Systems DRINKING WATER SYSTEM DRINKING WATER SYSTEM...
Page 6
The parts of ERS-105 Operation regulation Turn on water source. Post carbon filter To RO system Input water The 3rd stage filter The 1st stage filter Switch on water tank. The 2nd stage filter To the faucet To the tank Let the water run for at least 30 minutes.
Remove the membrane by a pincer. Install the membrane by carefully Input water pushing the spigot end into the socket at the far end of the housing until completely in. Tank ERS-105 Quick-Change RO Systems ERS-105 Quick-Change RO Systems DRINKING WATER SYSTEM DRINKING WATER SYSTEM...
Remove the membrane housing cap. Install the membrane by carefully pushing the spigot end into the socket at the far end of the housing until completely in. ERS-105 Quick-Change RO Systems ERS-105 Quick-Change RO Systems DRINKING WATER SYSTEM DRINKING WATER SYSTEM...
Need help?
Do you have a question about the ERS-105 and is the answer not in the manual?
Questions and answers