Sony mvc-cd250 Operating Instructions Manual page 85

@ The flash guide number varies according to the
IS0
sensitivity of the camera, so be sure to
check the IS0 number.
* The flash does not strobe when shooting in
the flash ilpto the You can mount a commercially available
Burst, Exposure Bracket, Twilight, MPEG
movie or Multi Burst mode.
iieck.
external flash that supports hot shoe.
0 Note that the camera may not function properly
or may malfunction when using a flash
The built-in
flash does not strobes.
For details, please consult the
operating instructions supplied with
your flash.
The flash also strobes when the mode
dial is set to
, S or SCN, but we
recommend recording with the mode
dial set to M or A when using a flash
without an auto adjustment function
(full flash).
manufactured by another company for a
specific camera (generally a flash with multiple
contact points on the hot shoe), a high-voltage
type flash, or a flash accessory.
* When using the built-in flash or using the
optional external Ilash, set [HOT SHOEJ to
[OFF].
5 Set the most appropriate aperlum value
according to the guide nun&r oftbe Rash used
and the distance to the subject.