Samsung HT-E6730W Service Manual page 26

3. Disassembly and Reassembly
3. Disconnect the FFC between the Cover Front Assy and the MAIN
PCB.
Loosen the bottom and side clips and tilt up.
•
Lift the Cover Front Assy at a 45 degree angle upward.
•
Then the hooks on the top side can be automatically
•
removed.
4. Disconnect the Touch ITO Film FPCs on Front PCB.
• Unfasten 2 screws and pull out the Front PCB.
: BH,+,B,M3,L10,ZPC(BLK),SWRCH18A
• Disconnect the FFC from Front PCB.
3-2
Description Description Photo
Copyright© 1995-2012 SAMSUNG. All rights reserved.