Navman SmartS TM User Manual page 54

PiN Pocket PC 00 | User Manual
Guidance Settings
1. From the Main Menu, tap
will open.
2. Modify the settings as required:
• To enable voice guidance during navigation, select the Voice Instructions check box in
the Voice Instructions section.
• To change the voice scheme used for voice guidance during navigation, select
your preferred voice scheme from the Voice Scheme drop-down box in the Voice
Instructions section.
• To change the units used to measure distance in SmartS, select either kilometres or
miles, in the Distance Units section.
. Tap to accept these changes and open the Map screen.
Route Recording
Routes can be saved to your PDA or memory card for future reference.
To record a route, complete the following:
1. From the Main Menu, tap
screen will open.
2. Tap Start in the Route Recording section to begin recording the route. The Route
Recording Save As screen will open.
. Type a name for the route in the Name box.
4. Select a folder from the Folder drop-down box in which to save the route recording.
5. Select a memory location from the Location box in which to save the folder and route
recording.
6. Tap OK. The Guidance Settings screen will reopen.
7. Tap
8. Navigate to your destination.
9. From the Main Menu, tap Setup, then the Guidance tab. The Guidance Settings screen
will open.
, Setup, then the Guidance tab. The Guidance Settings screen
, Setup, then the Guidance tab. The Guidance Settings
to open the Map screen.
54