MSI Z68A-G45 Series Manual page 39

Important
• If you do not have any EMI problem, leave the setting at [Disabled] for optimal system
stability and performance. But if you are plagued by EMI, select the value of Spread
Spectrum for EMI reduction.
• The greater the Spread Spectrum value is, the greater the EMI is reduced, and the
system will become less stable. For the most suitable Spread Spectrum value, please
consult your local EMI regulation.
Remember to disable Spread Spectrum if you are overclocking because even a slight
•
jitter can introduce a temporary boost in clock speed which may just cause your
overclocked processor to lock up.
▶ VDroop Control
This item is used to select the VDroop control mode.
▶ CPU Core Voltage/ DRAM Voltage
These items are used to adjust the CPU core voltage/ memory voltage.
▶ Current CPU Core Voltage/ Current DRAM Voltage
These items show current CPU Core/ DRAM voltage. Read-only.
▶ GPU Voltage/ PCH 1.05
These items are used to adjust the voltage of GPU/ chipset.
▶ Overclocking Profiles
Press <Enter> to enter the sub-menu.
▶ Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these items are used to save
the current settings, and you can to load the settings from the stored profile.
▶ OC Retry Count
When overclocking has failed, setting this item as [1, 3] will allow system to reboot
1/ 3 times with the same overclocked configuration. If overclocking has failed every
time, the system will restore the defaults.
▶ CPU Specifications
Press <Enter> to enter the sub-menu. The submenu shows the information of installed
CPU.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the installed CPU
technologies. Read only.
En-29