Navigon Fujitsu Siemens Pocket LOOX N100 User Manual page 66

User Manual MobileNavigator 6
- 64 -
1. Tap on the point to which you wish to navigate.
The destination on which you have tapped appears under the
crosshair.
In the Selected destination field in the lower third of the
screen you are shown geographical coordinates of the
destination and the respective address.
2. Tap on the (OK) button.
The D
ESTINATION ON MAP
you can see the detailed address data of the chosen
destination.
Buttons with various functions are shown.
Funktion
Take me there
Interim destination
Add to route
Save
Neighbourhood
search
window opens. In the top left corner
Description
Tap on this button to start navigating to
the selected point. If you are currently
navigating, this will be interrupted. You
can start navigating to your original
destination however via the L
list.
DESTINATIONS
This function is only available if you are
currently navigating.
Tap on this button in order to set the
chosen point as an interim destination.
The navigation then first leads to this
interim destination. Then you can
continue your navigation to your original
destination.
Refer to chapter "Inserting an interim
destination" on page 70 for more
information.
Tap on this button in order to add the
chosen point as the last point in the route
planning. If no route planning has been
opened, then the chosen point will be the
first point in a new route planning. (refer
also to chapter "Route planning",
page 46)
Opens the S
AVE DESTINATION AS
window. You can enter a name under
which the specified point is saved in the
F list.
AVOURITES
Refer to chapter "Saving destinations" on
page 40 for more information.
Opens the POI
NEARBY
can search for destinations close to the
specified point.
Refer to chapter "Point of interest
nearby" on page 27 for more information.
Map in the 1133HDestination search mode
AST
...
window. Here you