Navigon 13xx User Manual page 30

Tap on
►
The list now contains only those destinations which begin with or
contain the letters entered.
6. Tap on the name of the destination.
The D
Indicated on the Activate MyRoutes button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Sometimes the destination cannot be found exactly because, for
example, several restaurants with the same name exist in the town
in question.
In this case a window opens with all the destinations matching your
entry plus additional information.
►
7. Tap on Navigation.
- or -
Tap on Parking in order to search for a car park near your
destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 34. Please read on there.
Direct access to POI
The direct access area contains 3 categories of POI. Destinations in
your vicinity that correspond to one of these categories can be viewed
here quickly and without further entry.
In the N
►
order to select which categories or sub-categories are to be
available for direct access.
Note: The categories for the Direct Access function are the same as
those available for the POI on Your Route function. (Refer to "Map
options in Navigation mode" on page 49)
Note: GPS reception must be good enough for determining your
position. Check the
reception is good enough.
For more details refer to the chapter "Initialising the GPS receiver" on
page 23.
Navigation
(Open List).
ETAILED INFORMATION ABOUT THE DESTINATION
Tap on Activate MyRoutes in order to change the setting.
Tap on the destination to which you want to navigate.
window tap on Options > Settings > General in
AVIGATION
(GPS Ready) symbol to see whether GPS
User's manual NAVIGON 13xx | 23xx
window opens.
- 30 -