Additional Information; Troubleshooting; Specifications - Pioneer X-DS301-K Operating Instructions Manual

Docking speaker with alarm clock
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. Check the points below
when your X-DS301-K does not operate properly. The problem sometimes may lie in electrical
components, please also check the components and appliances being used. Contact your
nearest Pioneer authorized service if the problem still exists.
If this happens:
No audio stream or music intermittency.
The power does not turn on.
Can't operate the remote control.
The clock is not set to the correct time.

Specifications

Amplifier section
Tuner section
Frequency range (FM): 87.5 MHz to 108.0 MHz
Speaker section
Miscellaneous
Power requirements: AC 100 V to 240 V, 50 Hz/60 Hz, DC 5 V/2 A
Power consumption: 10 W
In standby: 0.65 W
Dimensions (W) × (H) × (D): 243 mm × 46 mm × 150 mm
Weight: 660 g
Specifications and the design are subject to possible modifications without notice, due to
improvements.

Additional Information

Try this:
Use the AC adapter and connect the device
to the power plug on the wall.
Replace the batteries.
16
Check power supply to make sure it's
correctly connected to the outlet.
Check 3.5 mm AUX IN cable to make sure
it's correctly connected.
Check iPod/iPhone connection to make
sure it's correctly docked.
Check sources to make sure your audio
input is switched to correct source.
Replace the batteries.
Reset the clock.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents