Power Cord Socket - Fender Ramparte Owner's Manual

MAJESTIC AMPLIFICATION FOR THE DISCERNING MUSICIAN:
• 9 Watts of output power
• One 6L6 output tube; Class "A" circuit
• Two 12AX7 preamp tubes
• 12" Special Design Ramparte
speaker
• 1/4" speaker plug may be
disconnected to use an
external speaker enclosure
• Two inputs (COOL and HOT)
with volume controls for each
• COOL channel voiced for warm clean
and moderately overdriven tones
• HOT channel delivers overdrive tones
from mild to wild
• Two-tone chocolate & copper "home fabric" covering
• Vintage leather strap handle
POWER CORD SOCKET —
Connect to a grounded outlet
using the included power
cord in accordance with the
voltage and frequency ratings
specified on the rear panel of
your amplifier.
TYPE:
POWER REQUIREMENTS:
INPUT IMPEDANCE:
POWER OUTPUT:
FUSE:
TUBES:
SPEAKER:
DIMENSIONS:
WEIGHT:
COOL
INPUT
COOL INPUT / COOL VOLUME
PRODUCT REGISTRATION — Please visit:
FUSE — Protects the unit in case of electrical
faults. Replace only with the type and rating
specified on the rear panel of your amplifier.
PR 2409
80 W
COOL: 1MΩ
9W RMS into 8Ω @ 10%THD
F2AL, 250V for 100V–120V versions
One 6L6
8Ω, 12", 20W
HEIGHT: 15.75 in (40.0 cm)
21 lb (9.54 kg)
Product specifications are subject to change without notice.
HOT INPUT / HOT VOLUME
HOT COOL
INPUT VOLUME
5
3 7
1 9
http://www.fender.com/prodreg
FUSE
HOT: 1MΩ
F1AL, 250V for 220V–240V versions
Two 12AX7
Extension speaker (if used): 8Ω, 20W minimum
WIDTH: 17.33 in (44.0 cm)
POWER SWITCH — Switches
the unit on (ON) and off (OFF).
HOT
VOLUME
10
7
13
4
1
16
POWER INDICATOR
SPEAKER JACK — Connect the
internal speaker or an external
speaker (8Ω, 20W min.) here.
<<< REAR
PANEL
DEPTH: 9.875 in (25.0 cm)
ON
OFF