Adjusting The Picture - Lenovo L2060wA Service Manual

20.0" LCD Color Monitor

3.3 Adjusting the Picture

To use the controls:
1. Press in the bottom right of monitor to power on,and then the blue indicator become bright.
2. to open the main OSD menu.
Press
3. or to move among the icons.Select an icon and press
Use
sub-menu,you can move between options using
to make adjustments.Press
4. to move backwards through the sub-menus and exit from the OSD.
Press
5. Press and hold
OSD.Press and hold
6. Enables DDC/CI by default.Use OSD Exit Key,Press and hold the
disable/enable DDC/CI function.The words "DDC/CI disable" shows on the screen.
OSD functions
OSD Icon on Main
Menu
Brightness/Contrast
Image Position
Image Setup
to save.
for 10 seconds to lock the OSD.This will prevent accidental adjustments to the
for 10 seconds to unlock the OSD and allow adjustments to OSD.
Submenu
Brightness
Contrast
Horizontal Position
Vertical Position
Automatic
Manual
or ,then press
Description
Adjusts overall brightness.
Adjusts difference between
light and dark areas.
Moves image left or right.
Moves image up or down.
Automatically optimizes image
(size,position,phase,and clock).
Manually optimizes the image.
Clock
Phase
Save
7
Lenovo L2060wA
to access that function. If there is a
to select that function.Use
buttons for 10 seconds to
Controls and Controls and
adjustments adjustments
(Analog) (Digital)
Same as analog
Controls
locked-not
required for
digital input
or