Engine Shut-Off Cord (Lanyard); Oil; Engine; Install Cowling - Yamaha 40X Owner's Manual

Operation
with no binding or excessive free play.
Operate the throttle levers several times to
G
make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
Look for loose or damaged connections of
G
the throttle and shift cables.
EMU36481

Engine shut-off cord (lanyard)

Inspect the engine shut-off cord for damage,
such as cuts, breaks, and wear.
1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
3. Engine shut-off switch
32
EMU27120

Oil

Check to be sure you have plenty of oil for
G
your trip.
EMU27141

Engine

Check the engine and engine mounting.
G
Look for loose or damaged fasteners.
G
Check the propeller for damage.
G
EMU36953

Install cowling

1.
2.
3.
4.
5.
3
2
1
After installing, check the fitting of the top
ZMU02003
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
Be sure that a cowling lock lever is re-
leased.
Be sure that the rubber seal is seated all
the way around the top cowling.
Place the top cowling on bottom cowl-
ing.
Check to be sure the rubber seal fits cor-
rectly all the way around the engine.
Move the lever to lock the cowling as
shown. NOTICE: If the cowling is not
installed correctly, water spray under
the cowling can damage the engine,
or the cowling can blow off at high
speeds.
[ECM01990]
ZMU06115