VIETA VM-HS227BK User Manual page 16

Display
There are two displaying modes, [Clock] and
[Clock & Calendar] Select [Clock] select [Clock
& Calendar].
Set time
Use direction key, time can be set
Exit
Quit, return to main menu.
Auto-Power
Press direction key of remote control, move
cursor to [Auto-Power], and press"ENTER", it will
enter into auto-power mode.
Power on Enable
Set auto-power on.
Power off Enable
Set auto-power off.
Set Time
Use direction key, you can set time of power on
and power off.
Exit
Quit, return to main menu.
Setup
Select [Setup] in main menu, press"ENTER", it
will enter setup mode.
You may not change this parameter, use default
value.
Photo setting
Submenu as below:
Interval Time: 5/10/15/30/sec,1min

Transition Effect: No Effect/Blind Vertical/Blind

Horizontal/Color Ration Ver/Color Ration Hor/
block1/2/3/4/5/6/7/8/9/Fade in fade out/Random
Show Type: Fit screen/full screen

Browse: Thumbnail/File Manager

16
Auto-play
Photo
The option can switch on or off auto-play function
of Photo. Switch on, it will auto play photo while
entering [Photo]; Switch off, you must select
photo files you want to play then press "PLAY".
Music
The option can switch on or off auto-play function
of Music. Switch on, it will auto play music while
entering [Music]; Switch off, you must select
music files you want to play then press"PLAY".
Movie
The option can switch on or off auto-play function
of Movie. Switch on, it will auto play movie while
entering [Movie]; Switch off, you must select
movie files you want to play then press"PLAY".
Display setup
Display Type: 16:9/4:3
Brightness: Normal/bright/soft

Contrast: +4/+3/+2/+1/0/-1/-2/-3/-4

TFT Brightness:

+7/+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6/-7
TFT Contrast:

+7/+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6/-7
TFT Saturation:

+7/+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6/-7
Custom Setup
OSD Language: English/French/German/

Italian/Spanish/Portuguese/Dutch/Polish.
Encoding: Western European/Central

European
Style: Style1/2/3/4

LOGO Type: Default/Favorite

Repeat Mode: Off/one/folder/all

Default: Read

Exit
Quit, back to main menu.
Screen saver
Under the general condition, it will enter screen
saver program automatically to protect your
screen if there isn't any data of the system to
play continuously or there isn't any action of
the user more than 20 seconds. It will not quit
"screen saver" mode until any key is pressed,
and go back to the main menu.
The following are some special conditions, they
will not enter screen saver mode:
Under [Photo] [Music] [Movie].

Displaying clock or clock and calendar.

7" Double Digital Frame