Safety Precautions - VIETA VM-HS227BK User Manual

7” double digital frame
Table of Contents

Advertisement

Available languages

Available languages

Safety Precautions

Warning: To reduce the risk of electric shock,
do not remove the cover or back. There are no
user-serviceable parts inside. Refer servicing to
qualified personnel.
Warning: To prevent fire or electric shock
hazard, do not expose the unit to rain or
moisture.
Do not expose the Adaptor and portable to water
(dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
unit.
Keep the unit away from direct sunlight and heat
source such as radiators or stoves.
Do not block the ventilation openings. Slots and
openings on the unit are provided for ventilation.
The openings should never be blocked by
placing your unit on a cushion, sofa or other
similar surface.
Do not place the unit on unstable cart, stand,
tripod, bracket or table.
The unit may fall, resulting in possible damage
or injury.
Never place heavy or sharp objects on the LCD
panel or frame.
Only use the AC adapter included with unit.
Using any other adapter will void your warranty.
(AC adapter optional)
The plug of AC adaptor is used as the disconnect
device, the disconnect device shall remain
readily operable.
Unplug the power from the outlet when the unit
is not in use.
Attention should be drawn to the environmental
aspects of battery disposal.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same
or equivalent type.
WARNING: The battery (battery or batteries or
battery pack) shall not be exposed to excessive
heat such as sunshine, fire or the like.
WARNING: Excessive sound pressure from
earphones or headphones can cause hearing
loss.
WARNING: Only use attachments/
accessories specified provided by the
12
manufacturer, the unit is supplied by AC adapter
or car charger(optional), the AC adapter or
car charger is used as disconnect device, the
disconnect device shall remain readily operable.
Caution: Danger of explosion if battery is
incorrectly replaced, replaced only with the same
or equivalent type (Lithium battery).
WARNING RISK OF ELECTRIC SHOCK DO
NOT OPEN
Warning: To prevent direct exposure to laser
beam, do not open the enclosure. Visible laser
radiation when open.
Warning: Never stare directly into the laser
beam.
Caution: Do not install this product in a
confined space such as a book case or similar
unit.
Charging Car Media Player
This Car Media Player comes with an integrated
rechargeable battery.
Follow below steps to connect Car Media Player
to the power outlet and charge the battery.
1. Plug car charger into the power jack on the
Car Media Player and your car.
2. Once the battery is fully charged, the charging
LED will turn OFF.
Power on/off
1. Press "POWER" on the product, the product
will be power on, press "POWER" for 3seconds,
the product will be power off.
2. Press "POWER" on the remote control, the
product will be power on, press again, will be
power off.
USE THE CONNECTION CABLE TO
SYNCHRONIZE THE TWO PLAYERS
BEFORE TURN ON THE SUBSIDIARY SCREEN
PLAYER, MAKE SURE IT IS CONNECTED BY
THE ATTACHED CONNECTION CABLE FROM
THE PRIMARY PLAYER UNIT
7" Double Digital Frame

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents