Denon AVR-1705 Operating Instructions Manual page 30

ENGLISH
Auto tuning
1 2 4
1
4
3
2
1
Set the input source to "TUNER".
(Main unit) (Remote control unit)
2
Watching the display, press the BAND button
to select the desired band (AM or FM).
(Main unit) (Remote control unit)
Manual tuning
1
Set the input function to "TUNER".
2
Watching the display, press the BAND button
to select the desired band (AM or FM).
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO"
indicator turns off.
30
3
Press the MODE button to set the auto tuning
mode.
Lit
(Remote control unit)
4
Press the TUNING • (+) or ª (–) button.
(Main unit) (Remote control unit)
• Automatic searching begins, then stops
when a station is tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the
"STEREO" indicator lights on the display when a
stereo broadcast is tuned in. At open frequencies,
the noise is muted and the "TUNED" and
"STEREO" indicators turn off.
3
Press the MODE button to set the manual
tuning mode.
Check that the display's "AUTO" indicator
turns off.
4
Press the TUNING • (+) or ª (–) button to tune
in the desired station.
The frequency changes continuously when the
button is held in.
Preset stations
2 3
3
2
1, 4
Preparations:
Use the "Auto tuning" or "Manual tuning" operation
to tune in the station to be preset in the memory.
1
Press the MEMORY button.
(Remote control unit)
2
Press the SHIFT button and select the desired
memory block (A to G).
(Main unit) (Remote control unit)
NOTE:
• Please make sure the "AUDIO" position of
the slide switch on the remote control unit.
3
Press the PRESET • (+) or ª (–) button to
select the desired preset channel (1 to 8).
(Main unit) (Remote control unit)
4
Press the MEMORY button again to store the
station in the preset memory.
(Remote control unit)
To preset other channels, repeat steps 1 to 4.
A total of 56 broadcast stations can be preset – 8
stations (channels 1 to 8) in each of blocks A to G.